Troubleshooting Of Performance Codes - Detroit Diesel MBE 900 Technician Manual

Hide thumbs Also See for MBE 900:
Table of Contents

Advertisement

CODES
4.3

TROUBLESHOOTING OF PERFORMANCE CODES

Performance codes indicate the detection of mechanical failures by the DDEC system. The
response would be to troubleshoot a PID or SID as follows.
To avoid injury, use care when working around moving belts
and rotating parts on the engine.
Diesel engine exhaust and some of its constituents are known
to the State of California to cause cancer, birth defects, and
other reproductive harm.
Always start and operate an engine in a well ventilated
area.
If operating an engine in an enclosed area, vent the
exhaust to the outside.
Do not modify or tamper with the exhaust system or
emission control system.
NOTE:
The EGR systems in the MBE 4000 and MBE 900 engines contain fewer components
and use simpler control logic than the other series of Detroit Diesel engines. Therefore,
using the DTCs should be the primary means of solving troubleshooting problems.
The Detroit Diesel Diagnostic Link (DDDL) snapshots are not as dynamic on the MBE
engines and are usually just used to supplement the DTCs when troubleshooting.
4-8
PERSONAL INJURY
PERSONAL INJURY
7SE940 0505 Copyright © 2005 DETROIT DIESEL CORPORATION
PRELIMINARY
All information subject to change without notice. (Rev. 5/05)

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mbe 920Mbe 400

Table of Contents