Memorex MVD1311D User Manual page 24

ADDING AND DELETING CHANNELS
After setting channels into memory, you can add or delete channels as follows:
1
2
1
With the desired channel to add or delete selected, press
the MENU button 1; the Video menu will appear. Press the
VOLUME Up button 2 to select the Channel menu.
3
2
Press the VOLUME Up 1 or Down 2 button to select ON (to
skip) or OFF (to add).
Note: When Skip On is set for a channel, you cannot select
it using the CHANNEL/Navigation UP or DOWN buttons.
You must use the Number buttons to select the channel. If
you would like to use the CHANNEL/Navigation UP or
DOWN buttons to select this channel, set the channel to
Skip Off.
SETTING THE COLOR SYSTEM (for TV [NTSC] mode only)
1
1
2
Enter the Channel menu, as described in Step 1 above.
Press the CHANNEL Up 1 or Down 2 button until COLOR
SYSTEM is selected.
SETTING THE TV MENUS (CONTINUED)
0101
CHANNEL
SKIP OFF
RECEPTION AIR
AUTO SCAN
COLOR SYSTEM NTSC
1
0101
CHANNEL
SKIP OFF
RECEPTION AIR
AUTO SCAN
COLOR SYSTEM NTSC
2
Press the CHANNEL Up 1 or Down 2 button until SKIP
is selected.
4
When done, press the EXIT button to exit the menus.
2
Press the VOLUME Up 1 or Down 2 button to select AUTO
or NTSC. When done, press the EXIT button 3 to exit
the menus. NOTE: In the USA, the system is NTSC.
23
1
2
2 1
3