Memorex MVD1311D User Manual page 23

SETTING CHANNELS INTO MEMORY
This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit's memory.
1
2
1
With the TV on, press the MENU button 1; the Video menu
will appear. Press the VOLUME Up button 2 to select the
Channel menu.
3
Press the VOLUME Up button to start Auto Scan and the
unit will automatically cycle through all the channels (in
both NTSC and ATSC) and store active channels into
memory. When Auto Scan is complete, the lowest
memorized channel (NTSC/ATSC) will be displayed.
FAQs:
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or
local area, provides. Contact your company to determine the number of channels in your area.
NOTE:
• Make sure that the antenna or cable is connected properly before plugging in the AC power cord, turning on the unit
and accessing the Channel menu.
• The Channel system must be set before setting the channels into memory (see the previous page).
SETTING THE TV MENUS (CONTINUED)
0101
CHANNEL
SKIP OFF
RECEPTION AIR
AUTO SCAN
COLOR SYSTEM NTSC
2
Press the CHANNEL Up 1 or Down 2 button until
RECEPTION is selected. Press the VOLUME Up 3 or Down
4 button to select your option: AIR or CABLE. Press the
CHANNEL Up 1 or Down 2 button until AUTO SCAN is
selected.
4
To stop Auto Scan before it is finished, press the MENU
button; the lowest memorized channel (NTSC/ATSC) will
be displayed.
22
1
3
4
2