Safety Notes; Precondition For Use; Warning Symbols On The Device; Laws And Directives - Siemens SITRANS FM MAG 3100 Operating Instructions Manual

Safety notes

2.1

Precondition for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
2.2

Warning symbols on the device

Symbol
2.3

Laws and directives

General requirements
Installation of the equipment must comply with national regulations.
Instrument safety standards
The device has been tested at the factory, based on the safety requirements. In order to maintain
this condition over the expected life of the device the requirements described in these Operating
Instructions must be observed.
NOTICE
Material compatibility
Siemens Flow Instruments can provide assistance with the selection of wetted sensor parts.
However, the full responsibility for the selection rests with the customer and Siemens Flow
Instruments can take no responsibility for any failure due to material incompatibility.
SITRANS FM MAG 3100
Operating Instructions, 12/2021, A5E03005599-AE
Explanation
Consult operating instructions
2
9