Table of Contents
Advertisement
CHAPTER 2
2.1
SETTING A24EM JUMPER HEADERS
HC05A24EM USER'S MANUAL
MMDS05 CONFIGURATION AND OPERATION
This chapter explains how to configure and use your A24EM as part of
an MMDS05. For other parts of system installation or configuration, see
the MMDS05 operations manual (MMDS05OM/D). (If you will use
your A24EM as part of an HC05EVS system, go to Chapter 3 for corre-
sponding information.)
Paragraph 2.1 explains how to set A24EM jumper headers. Paragraph
2.2 explains how to install personality and help files pertaining to the
A24EM. Paragraph 2.3 explains remaining system installation.
Note that you can configure an A24EM already installed in the
MMDS05 station module enclosure. To do so, switch off station-module
power, remove the hatch, then follow the guidance of this chapter.
Be sure to switch off power if you reconfigure an
installed EM. Reconfiguring EM jumper headers with
power left on can damage MMDS05 circuits.
Your A24EM has four jumper headers, P4, P5, P6 and P9. Paragraphs
2.1.1.through 2.1.4 explain how to configure these headers.
CAUTION
2
MOTOROLA
2-1
Advertisement
Table of Contents
