Installation - Pyle PLTS79DUB User Manual

Copyright Notes:
This product incorporates copyright protection technology that is protected by
method claims of certain U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
Region Management information:
This product is designed and manufactured to respond to the Region Management
Information that is recorded on a digital video disc. If the Region number describled
on the DVD disc does not correspond to the Region number of this DVD player. the
disc cannot be played on by this DVD player.

INSTALLATION:

Before Installation:
• We recommend you to let a professional technician install the unit in the vehicle.
• Disconnect negative battery terminal of vehicle.
Installation Process:
• Carefully remove the existing head unit.
• Before finally installing this product, connect wiring harness temporarily and
make sure it's all connected up properly and test the head unit if it can work
properly. (Consult a qualified technician if you unsure)
• Lift the left or right top corner of the plastic outer trim ring then pull it o to
remove it.
• Insert the two bracket keys into the left and right side of the chassis to separate
the chassis from the housing.
• Insert the mounting sleeve into the dashboard and bend the mounting tabs out
with a screwdriver. Make sure that the lock lever is flush with the mounting
sleeve and it dose not project beyond it.
• Slide the digital video player carefully into the already fixated mounting sleeve
till it clicks into place.
• Use a metal strap to fix the rear part of the chassis.
• Connect wires as illustrated in the "wiring diagram".
• Install the plastic outer trim ring.
Note: If you need other screws to fix other terminal, please buy from your dealer
according to the drilling of holes size.
4
www.PyleUSA.com