Assigning A Knob Controller; Assigning A Knob Color; Assigning A Knob Destination; System - Kurzweil SP7 Grand User Manual

Sound Editing
Chapter 3.

3-1-3-1 System

The "System" tab offers a total of 9 possible choices:
Ctrl Override: When enabled*, all controller assignments mapped within the current Sound are overridden and
take on the Global mode settings instead.
*Caution: Once enabled, the only means to disable this controller is to go to Global mode (Global 1 page) and
manually set the "Override Controller" switch back to Off.
Blink Tempo: Enables the Alpha wheel LED ring to "blink" (strobe) along with the current Global BPM tempo.
ARP Enable: Turns the arpeggiator on/off. (Note: for an arp to run, one of the 8 available arps must first be
assigned to the zone in question on the Zone Edit page - see pg 31 for more detail).
ARP Latch: This destination controls the "Arp Latch" master switch (Zone Edit / Common page). When engaged,
this allows any Arp (A-H), that has its individual "Latch" parameter (ARP / Steps menu) set to "On", to continue
to play its pattern even after all piano keys have been released.

3-1-1 Assigning a Knob Controller

Tap the Controller field and select the desired Knob (P1
to P8) you want to assign. Selecting a given Knob
displays that knob's parameters on screen.

3-1-2 Assigning a Knob Color

Change the color of the knob LED ring by tapping the
Color tile and, on the following screen, dragging the
small circle about in the color palette wheel. Adjust the
contrast and brightness using the two adjacent vertical
control bars.
On the right you can also select between three groups
of color palettes: The Default color set, a set of Pastels,
and the most Recently used colors. The most recently
used set are automatically saved for convenient
repeated selection. Press OK to commit your selection.

3-1-3 Assigning a Knob Destination

The Destination parameter specifies the function of the
given Knob. Tap the Destination field to access the
function assignment page where you will be presented
with 8 Destination types to choose from: System, MIDI
CC, AUX FX, AUX EQ, Zone IFX, Audio FX, Vocal Proc
and Notes.
15
Chapter 3