Audio Fx; Vocal Proc; Notes; Assigning A Knob Target - Kurzweil SP7 Grand User Manual

Sound Editing
Chapter 3.

3-1-3-6 Audio FX

The "Audio FX" tab offers 4 possible destinations governing the Audio Input Mixer:
Output Volume : This function controls the volume level of the post IFX/pre Aux FX signal.
Pan : This function adjusts the left/right balance of the post IFX/pre Aux FX signal.
Reverb Send : This function controls the amount of post IFX sent to the Aux Reverb.
ChoDly Send : This function controls the amount of post IFX signal sent to the Aux Chorus and Delay.
3-1-3-7 Vocal Proc (Vocal Processor)
The Vocal Processor tab offers 3 possible destinations governing the Vocal Processor section:
Lead Process On/Off : This function turns the Lead Processing section on/off.
Auto Harm On/Off : This function turns the Auto Harmony section on/off.
Auto Harm Volume : This function controls the volume level of the Auto Harmony section.

3-1-3-8 Notes

The Notes tab allows you to select individual MIDI note numbers (#0-127) to trigger from the selected controller
knob. The selected note will be triggered throughout the rotation of the knob. The note velocity is determined by
the Max Value. This function can be usefully for triggering percussion hits and sound effects.
3-1-4 Assigning a Knob Target - ⓐ
A Knob's operating region is determined by its Target
assignment. Depending on the chosen Destination,
Target selection options can be: None, Preset, System,
Zone1~16, Zone ALL, FX A~D, FX ALL, Input 1~2 and
Input ALL.
3-1-5 Assigning a Knob Min Value - ⓑ
Sets the minimum adjustable value of the controller
knob (value range = 0-127).
3-1-6 Assigning a Knob Max Value - ⓒ
Sets the maximum adjustable value of the controller
knob (value range = 0-127).
3-1-7 Assigning a Knob Initial State - ⓓ
If the Initial State Send is enabled, the Initial State is the
starting value (0-127) applied to the given knob when a
Sound is first selected.
3-1-8 Knob Initial State Send - ⓔ
With the Initial State Send enabled, the Initial State
value (above) is set as the knob starting point when a
Sound is first selected.
17
Chapter 3