Before You Start - Titan TTB826HDC Manual

EN

Before you start

Setup
Pole assembly
1. Loosen the locking lever (7) (Fig. 1, step 1) and pull out the pole extension (6)
(Fig. 1, step 2), then fasten the locking lever (7) (Fig. 1, step 3).
2. Move the locking sleeve (5) back onto the pole extension (Fig. 1, step 4).
3. Align the pole extension (6) with the pole support (4) and insert it. Make sure
the pins (6a) snaps in the bores (4a) for reliable connection (Fig. 1, step 5).
4. Fit the locking sleeve (5) on the thread of pole support (4) and tighten the
locking sleeve (5) clockwise to secure the connections (Fig. 1, step 6).
Blade cover
1. Remove the blade cover (18) from the cutting device (blade) (1) before
operation (Fig. 2).
2. Keep the blade cover (18) safely.
NOTE: Always attach the blade cover (18) when the product is not in
use, for storage and transportation.
To attach the blade cover (18), align and push the blade cover onto the
cutting device (blade) (1).
14
4.
6 5
2.
1.
4
18
6a
3.
7
6
4a 6a
5.
Fig. 1
1
Fig. 2
TTB826HDC by TITAN
6.
5