Titan TTT831HDC Instructions Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Trimmer
  5. TTT831HDC
  6. Instructions manual

Titan TTT831HDC Instructions Manual

Cordless pole hedge trimmer/ pruner
Hide thumbs
Table of Contents

Advertisement

Quick Links

EN
Cordless Pole Hedge
Trimmer/ Pruner
TTT831HDC
WARNING: Read the instructions before using the product!

Advertisement

Table of Contents
loading

Related Manuals for Titan TTT831HDC

Summary of Contents for Titan TTT831HDC

  • Page 1 Cordless Pole Hedge Trimmer/ Pruner TTT831HDC WARNING: Read the instructions before using the product!
  • Page 2 Let’s get started... These instructions are for your safety. Please read through them thoroughly before use and retain them for future reference. started... Getting Safety information Your product Before you start detail... more Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications...

  • Page 3: Safety Warnings

    TTT831HDC-Li by TITAN Safety information Safety warnings General power tool safety warnings WA R N I N G ! R e a d a l l s a f e t y w a r n i n g s , instructions, illustrations and specifications provided with this power tool.
  • Page 4 Safety information TTT831HDC-Li by TITAN Safety warnings 3. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 4. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
  • Page 5 TTT831HDC-Li by TITAN Safety information power tools that have the switch on invites accidents. 4. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
  • Page 6 Safety information TTT831HDC-Li by TITAN Safety warnings 4. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
  • Page 7 TTT831HDC-Li by TITAN Safety information 3. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects that can make a connection from one terminal to another.
  • Page 8 Safety information TTT831HDC-Li by TITAN Safety warnings Hedge trimmer safety warnings: 1. Keep all parts of the body away from the blade. Do not remove cut material or hold material to be cut when blades are moving. Blades continue to move after the switch is turned off.
  • Page 9 TTT831HDC-Li by TITAN Safety information 7. Do not use the hedge trimmer in bad weather conditions, especially when there is a risk of lightning. This decreases the risk of being struck by lightning. Additional safety warnings for pole hedge trimmer 1.
  • Page 10 Safety information TTT831HDC-Li by TITAN Safety warnings wire may make exposed metal parts of the product "live" and could give the operator an electric shock. 4. Keep cable away from cutting area. During operation the cable may be hidden in shrubs and can be accidentally cut by the blade.
  • Page 11 TTT831HDC-Li by TITAN Safety information 12. Carry the product by the soft grip with the product switched off and away from your body. When transporting or storing the product always fit the guide bar cover. Proper handling of the product will reduce the likelihood of accidental contact with the moving saw chain.
  • Page 12 Safety information TTT831HDC-Li by TITAN Safety warnings 21. Remove branches in section. 22. Use the harness provided. 23. Do not wear multiple belt harnesses and/or shoulder harnesses simultaneously. Causes and operator prevention of kickback Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes in and pinches the saw chain in the cut.
  • Page 13 TTT831HDC-Li by TITAN Safety information 3. Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars and chains may cause chain breakage and/or kickback. 4. Follow the manufacturer ’s sharpening and maintenance instructions for the saw chain.
  • Page 14 Safety information TTT831HDC-Li by TITAN Safety warnings Vibration and noise reduction To reduce the impact of noise and vibration emission, limit the time of operation, use low-vibration and low-noise operating modes as well as wear personal protective equipment. Take the following points into account to minimise the vibration and noise exposure risks: 1.
  • Page 15 TTT831HDC-Li by TITAN Safety information Emergency Familiarise yourself with the use of this product by means of this instruction manual. Memorise the safety directions and follow them to the letter. This will help to prevent risks and hazards. 1. Always be alert when using this product, so that you can recognise and handle risks early.
  • Page 16 Safety information TTT831HDC-Li by TITAN Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
  • Page 17 Safety information TTT831HDC-Li by TITAN Do not expose the product to rain or wet conditions (moisture). Keep hands away from moving cutting device! Objects thrown by the product could hit the user or other bystanders. Always ensure that other people and pets remain at a safe distance from the product when it is in operation.
  • Page 18 Safety information TTT831HDC-Li by TITAN Symbols Do not dispose of battery packs in rivers or immerse in water. Do not dispose of battery packs in fire. They will explode and cause injury. Do note expose battery packs to heat in excess of 40 ºC.

  • Page 19: Your Product

    TTT831HDC-Li by TITAN Your product Your product 7a 7 8 13 14 10 11 19 19a 1. Rear handle a. Bore (x2)* 25.Mounting bolt 2. Lock-off button 14.Unlock button for 26.Tension screw 3. On/off switch angle adjustment* 27.Spiked bumper 4. Rear safeguard 15.Motor head...

  • Page 20: You Will Need

    Your product / Before you start TTT831HDC-Li by TITAN Your product NOTE: Parts marked with * are not shown in this overview. Please refer to the respective part in the instruction manual. Unpacking 1. Unpack all parts and lay them on a flat, stable surface.
  • Page 21 TTT831HDC-Li by TITAN Before you start Setup WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with damaged parts! Follow the assembly instructions step-by-step and use the pictures...
  • Page 22 Before you start TTT831HDC-Li by TITAN Setup 13a 11a 13a 11a Fig. 2 13a 11a Fig. 2 Fig. 2 Blade cover 1. Remove the blade cover (16) from the hedge trimmer blade (17) before operation (Fig. 3). 2. Keep the blade cover (16) safely.
  • Page 23 TTT831HDC-Li by TITAN Before you start Saw chain and guide bar The saw chain (20) and the guide bar (19) are pre-assembled on the pruner cutting unit. The user can re-assemble them with the new ones, if necessary. 1. Place the product on a suitable flat surface with the chain saw cover (22) facing forwards.
  • Page 24 Before you start TTT831HDC-Li by TITAN Setup Fig. 7 Fig. 7 Fig. 7 7. The saw chain movement is as indicated by the arrow. Make sure the saw chain (20) is properly placed over the sprocket wheel (19a) of the guide bar (19) (Fig.
  • Page 25 TTT831HDC-Li by TITAN Before you start 9. Refit the chain saw cover (22) and slightly tighten the locking wheel (21) clockwise (Fig. 10). Do not tighten the locking wheel (21) completely as saw chain tensioning is required first. Fig. 10 NOTE: The saw chain (20) has not yet been tensioned.

  • Page 26: Chain Lubrication

    Before you start TTT831HDC-Li by TITAN Setup 2-4 mm 2-4 mm Chain ‘tie straps’ Chain ‘tie straps’ Fig. 11 Fig. 12 Fig. 11 Fig. 12 3. Adjust the tension if you find that the saw chain (20) is too loose or tight.
  • Page 27 TTT831HDC-Li by TITAN Before you start 3. Fill suitable lubricant into the tank using an oil funnel fitted with a filter to avoid debris entering the tank. We recommend using environmentally friendly chain oil specially intended to be used with this product.

  • Page 28: Battery Pack

    Before you start TTT831HDC-Li by TITAN Chain lubrication 1. Make sure the guide bar (19) and the saw chain (20) are in place when you check the oil delivery. 2. Start the product; keep it running at no load and check if the chain oil is delivered as shown in the figure (Figs.15, 16).
  • Page 29 TTT831HDC-Li by TITAN Before you start Battery capacity indicators The battery pack (32) is equipped with the battery capacity indicators (32a) which are used to give an indication of the battery pack’s remaining capacity. Press the battery capacity button (32b) to check battery capacity (Fig. 19). The LEDs will stay lit for approximately 5 seconds.
  • Page 30 TTT831HDC-Li by TITAN more detail... Product functions Operation Care and maintenance Troubleshooting Recycling and disposal Guarantee Technical specifications Declaration of conformity...

  • Page 31: Intended Use

    TTT831HDC-Li by TITAN Product functions Intended use This cordless hedge trimmer TTT831HDC-Li is designated with a rated voltage of 18 V . It is designed only to be used with the battery pack which is listed in the chapter of “Technical specifications”.

  • Page 32: Length Adjustment

    TTT831HDC-Li by TITAN Product functions Harness Fig. 21 Fig. 22 Fig. 21 Fig. 22 WARNING! Always attach the product to the harness (30). Do not carry it only with your hands! 5. In case of emergency hold the soft grip (7a)

  • Page 33: Angle Adjustment

    TTT831HDC-Li by TITAN Product functions Fig. 24 Fig. 24 Fig. 24 Angle adjustment 30° The angle of the blade head for hedge trimmer cutting 30° 14 13 14 13 30° 14 13 unit can be adjusted into five positions (Fig. 25): 1.
  • Page 34 Product functions TTT831HDC-Li by TITAN Switching on/off WARNING! The product will continue to work for some time even after the motor has been switched off! Wait until it comes to a complete stop before you put the product down! Saw chain stop test NOTE: Perform the following test before operating your product when assembled of pruner cutting unit.

  • Page 35: General Operation

    TTT831HDC-Li by TITAN Operation General operation 1. Check the product, its battery pack and charger as well as accessories for damage before each use. Do not use the product if it is damaged or shows wear. Take care of any problem you find or have the product checked by qualified specialist.
  • Page 36 Operation TTT831HDC-Li by TITAN Trimming 5. Always hold the product firmly with both hands on soft grip (7a) of the rear pole (7) and the rear handle (1). Never operate this product using only one hand. 6. Do not rush and do not attempt to cut too much with one stroke of the cutting device.
  • Page 37 TTT831HDC-Li by TITAN Operation NOTE: When shaping it is advisable to achieve a trapezoidal shape (Fig. 31). A trapezoidal cut corresponds to the natural growth of plants and results in optimal hedge growth, as it will expose more light to the lower end of the hedge.
  • Page 38 Operation TTT831HDC-Li by TITAN Pruning Kickback WARNING! Beware of kickback! Kickback can lead to dangerous loss of control of the product and result in serious or fatal injury to the operator or anyone standing close by! Always be alert because...
  • Page 39 TTT831HDC-Li by TITAN Operation max 60º Fig. 33 Fig. 34 6. Never stand directly under the limb you are sawing. Objects may fall different than expected. Always position yourself out of the path of falling limps (Fig. 35). 7. Keep other persons away from cutting end of product and at a safe distance from the work area.
  • Page 40 Operation TTT831HDC-Li by TITAN Pruning Fig. 37 Fig. 38 WARNING! This product has not been designed to provide protection from electric shock in the event of contact with overhead electric lines! Therefore do not use product near cable, electric power or telephone lines.

  • Page 41: After Use

    TTT831HDC-Li by TITAN Operation Fig. 39 Thick branches When cutting off larger branches three cuts are necessary. Fig. 40 Fig. 41 Fig. 42 1. First cut into the branch from below outside the place where you intend to cut off the branch. The cut should go from one third to halfway through the branch (Fig.

  • Page 42: The Golden Rules For Care

    Care and maintenance TTT831HDC-Li by TITAN The golden rules for care WARNING! Always switch the product off, remove the battery pack (32) and let the product cool down before performing inspection, maintenance and cleaning work! 1. Keep the product clean. Remove debris from it after each use and before storage.

  • Page 43: Sprocket Wheel

    TTT831HDC-Li by TITAN Care and maintenance Hedge trimmer blade WARNING! Wear safety gloves when working on the cutting device and close to it! Use appropriate tools to remove debris, e. g. a brush or wooden stick! Never use your bare hands! 1.

  • Page 44: Guide Bar And Saw Chain Maintenance

    Care and maintenance TTT831HDC-Li by TITAN Guide bar and saw chain maintenance Guide bar Most guide bar problems can be prevented merely by keeping the product well maintained. Incorrect filling and non-standard cutter and depth gauge settings are the causes of most guide bar problems, primarily resulting in uneven bar wear.
  • Page 45 TTT831HDC-Li by TITAN Care and maintenance 5. Check the guide bar ‘rail’ for wear: Hold a ruler (straight edge) against the side of the guide bar and ‘cutter side plates’. If there is a gap between the ruler and guide bar the guide bar ‘rail’ is normal. If there is no gap (ruler flush against the side of the guide bar) the guide bar ‘rail’...
  • Page 46 Care and maintenance TTT831HDC-Li by TITAN Guide bar and saw chain maintenance 3. To sharpen the chain proceed as follows: -- Use protective gloves. -- Ensure the chain is correctly tensioned. -- Engage the chain brake to lock the chain on the bar.
  • Page 47 TTT831HDC-Li by TITAN Care and maintenance Spare parts/Replacement parts Spare parts are available at an authorised dealer or through our customer service. Repair This product does not contain any parts that can be repaired by the consumer. Contact an authorised service centre or a similarly qualified person to have it checked and repaired.

  • Page 48: Troubleshooting

    Troubleshooting TTT831HDC-Li by TITAN Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these...

  • Page 49: Recycling And Disposal

    TTT831HDC-Li by TITAN Recycling and disposal Recycling and disposal Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or local store for recycling advice. For further information visit www.recycle-more.co.uk.
  • Page 50 Guarantee TTT831HDC-Li by TITAN Guarantee We take special care to select high quality materials and use manufacturing techniques that allow us to create products incorporating design and durability. This product has a manufacturer’s guarantee of 2 years against manufacturing defects, from the date of purchase (if bought in store) or date of delivery (if bought online), at no additional cost for normal (non-professional or commercial) household use.
  • Page 51 Guarantee TTT831HDC-Li by TITAN Distributor: B&Q plc Chandlers Ford, Hants, SO53 3LE, United Kingdom www.diy.com Screwfix Direct Limited Trade House, Mead Avenue, Yeovil, BA22 8RT, United Kingdom www.screwfix.com...

  • Page 52: Technical Specifications

    Technical specifications TTT831HDC-Li by TITAN Technical specifications General > Rated voltage : 18 V > Rated no load speed n : 2400 min > Protection class : III > Weight : approx. 5.6 kg > Telescopic length : 184-234 cm >...
  • Page 53 Technical specifications TTT831HDC-Li by TITAN Sound values > Sound pressure level L as hedge trimmer : 74 dB(A) > Sound pressure level L as pruner : 76 dB(A) > Uncertainty K as hedge trimmer : 3 dB(A) > Uncertainty K as pruner : 2.5 dB(A)
  • Page 54 Technical specifications TTT831HDC-Li by TITAN Rating label explanation Hedge trimmer/ Pruner: TTT831HDC-Li = MODEL NUMBER TTB= TITAN (brand) 831= Series number HDC= Hedge trimmer/ Pruner Battery pack: TTI803BAT = MODEL NUMBER TTB= TITAN (brand) 803 = Series number BAT = Battery pack...

  • Page 55: Declaration Of Conformity

    Declaration of conformity TTT831HDC-Li by TITAN Declaration of conformity...

Table of Contents