Configure Modem With Lan Driver For Windows 2000; Configure Modem With Lan Driver For Windows Xp - D-Link DSL-260I User Manual

Configure Modem with LAN Driver for Windows 2000

1. Double-click on the My Computer icon, the Control Panel icon, and then the Network and Dial-up
Connections icon.
2. The Network and Dial-up Connections window appears. Right click on the Local Area Connection
for the USB ADSL LAN Adapter.
3. The Local Area Connection window appears. Click on Internet Protocol (TCP/IP), then click on
Properties.
4. The Internet Protocol (TCP/IP) window appears. Under the General tab, select Use the following IP
address. Enter the IP address, Subnet Mask, and Default Gateway given to you by your ISP or
ADSL service provider, then select Use the following DNS server addresses:, enter the DNS settings
given to you by your ISP or ADSL service provider. Click OK.
5. The General tab will again appear. Click OK.
6. The Network and Dial-up Connections window appears. Close this window to complete the
connection.

Configure Modem with LAN Driver for Windows XP

1. From the Start menu, select Control Panel, and then click on the Pick a category, Network and
Internet Connections.
2. The Network and Internet Connections window appears. Click on the or Pick a Control Panel icon,
Network Connections.
3. The Network Connections window appears. Right click on the Local Area Connection for the USB
ADSL LAN Adapter, then click on the Properties.
4. The Local Area Connection Properties window appears. Select the General tab, then choose on the
This connection uses the following items: list for the Internet Protocol (TCP/IP) and click the
Properties button.
5. The Internet Protocol (TCP/IP) Properties window appears. Under the General tab, select Use the
following IP address:, enter the IP address, Subnet Mask, and Default Gateway given to you by
your ISP or ADSL service provider, then select Use the following DNS server addresses:, enter the
DNS settings given to you by your ISP or ADSL service provider. Click OK.
6. The Local Area Connection Properties window appears. Click OK.
7. The Network Connections window appears. Close this window to complete the connection.
DSL-260I ADSL USB Modem User's Guide
29