2.6 Program Check (2D)
Program check (2D) is a function that draws the machining program movement path without executing automatic
operation. The machining program can be checked with graphic data drawn at a high speed.
Using [All display] menu, normal display and full-screen display modes can be switched.
The programs that can be checked are operation searched machining programs (MDI program for MDI mode).
If no machining program has been operation searched, the program check window will not be opened.
Refer to "4.3 Program Check (2D)" for details.
■ Normal display ([All display] is OFF)
<Drawing area>
■ Full-screen display ([All display] is ON)
<Drawing area>
E70 Series Instruction Manual
2.6 Program Check (2D)
I - 77