Connections - Intermec EasyCoder PF4i User Manual

Chapter 2 — Installation

Connections

12
Before you can use the serial interface, you may need to set up the
communication parameters, such as baud rate, parity, etc. as
described in Chapter 5,
Several types of optional interface and network boards are
available. For more information, see Chapter 7,
page 67. Refer to Chapter 5,
page 49, Chapter 6 "Setup Mode" on page
"Interfaces" on page 117
To connect the printer to power
1 Place the printer on a level surface, near an AC outlet. You
should be able to easily access the printer to load media and to
remove the printout.
2 Check and ensure that the printer is switched off.
3 Connect the power cord from the socket on the rear plate to
an electrical outlet (90 to 265 VAC).
To connect the printer to a computer
• The Easycoder PF4i Compact Industrial is fitted with one 9-
pin D-style subminiature (DB9) socket for the RS-232 serial
interface port. For more information, see Appendix C,
"Interfaces" on page
"Setting Up the Printer" on page
"Setting Up the Printer" on
61, and Appendix C,
for connection and setup instructions.
117.
EasyCoder PF4i User's Guide (IPL Version)
49.
"Options" on