Non-Adhesive Strip (Continuous Stock) - Intermec EasyCoder PF4i User Manual

Non-Adhesive Strip (Continuous Stock)

EasyCoder PF4i User's Guide (IPL Version)
(e) Label Gap
Recommended: 3.0 mm (0.12 inches)
Minimum: 1.20 mm (0.05 inches)
Maximum: 21.3 mm (0.83 inches)
The Label Stop Sensor must be able to detect the extreme front
edges of the labels. For more information, see
Label Stop Sensor" on page
Media Type Setup: Gap Stock
NON-ADHESIVE
STRIP
Chapter B — Media Specifications
"Adjusting the
101.
(a) Media Width
Maximum: 114.3 mm (4.5 inches)
Minimum (standard): 25 mm (1.00
inches)
Minimum (narrow Quick-Load): 40
mm (1.57 inches)
Minimum (wide Quick-Load): 80
mm (3.15 inches)
Media Type Setup: Continuous Stock
113