Table of Contents
Advertisement
2. Select the Network tab > Network Source Setup. Press the RIGHT Cursor key.
3. Select the Live tab from the Network Source Setup dialog box.
4. Select MEGA Live from the transducer list. Press the RIGHT Cursor key. A
checkmark will display in the box to show it is selected.
5. Press the EXIT key until the dialog box is closed.
3. Test MEGA Live Imaging on the Control Head
It is important to confirm that the MEGA Live Imaging transducer is providing sonar
returns to the display. The instructions in this section should be performed at trolling
speeds in calm, open water, in a large area that is far from shallow water, boats, or
other obstacles.
APEX/SOLIX Series
1. Tap the View widget icon in the side bar.
NOTE: Once the MEGA Live has been detected the first time, the MEGA Live
Imaging view will display on the Favorite Views widget.
2. Tap MEGA Live Imaging.
3. The sonar returns from the MEGA Live will begin to display on the MEGA Live
View. Review the display for the following information and see the illustrations
Reviewing the MEGA Live View.
• Bottom: Confirm that the bottom is visible on-screen.
Selecting the MEGA Live Imaging Transducer
47
Control Head Setup
Advertisement
Table of Contents
