Test Mega 360 Imaging On The Control Head - Humminbird MEGA 360 UNIVERSAL Installation Manual

3. Test MEGA 360 Imaging on the Control Head

It is important to confirm that the MEGA 360 Imaging transducer is providing sonar
returns to the display. The instructions in this section should be performed at trolling
speeds in calm, open water, in a large area that is far from shallow water, boats, or
other obstacles.
WARNING! The pod should NOT be in the water during high speed travel. The pod
should only be deployed when the boat is traveling at trolling speeds.
APEX/SOLIX Series
1. Tap the View widget icon in the side bar.
NOTE: Once the MEGA 360 has been detected the first time, the 360 Imaging
view will display on the Favorite Views widget.
2. Tap 360 Imaging.
3. The sonar returns from the MEGA 360 scan will begin to display on the
MEGA 360 View. Review the display for the following information and see the
illustration Reviewing the 360 View.
• Bottom: Confirm that the bottom is visible on-screen.
• Blocked Beams: If the beams hit a hard surface, it will appear as bright
white on the display. If the beams are blocked by any objects, move the
objects if possible. You can also adjust the 360 Range on the X-Press Menu
to see more or less detail on the display. In some cases, the trolling motor
will appear on the display as a shadow.
Control Head Setup
Selecting the Connected Transducer (HELIX)
20