Remote Control; Remote Control Unit; Inserting The Batteries - Clarion VRX935VD Owner's Manual & Installation Manual

7. REMOTE CONTROL

Remote control unit

[ DISC SEL ]
[
[
[ RPT ]
[ SUB TITLE ]

Inserting the Batteries

1.Turn the remote control unit over, then slide the
rear cover in the direction of the arrow.
2.Insert the AA (SUM-3, IECR-6/1.5V) batteries
that came with the remote control unit facing in
the directions shown in the figure, then close the
rear cover.
Notes:
Using batteries improperly can cause them to
explode. Take note of the following points:
• When replacing batteries, replace both batteries
with new ones.
• Do not short-circuit, disassemble or heat batteries.
• Do not dispose of batteries into fire or flames.
• Dispose of spent batteries properly.
14
VRX935VD
[ BAND ]
[ FUNC ]
[ 0-9 ]
],[ ]
[ RTN ]
[ SET UP ]
[ ENT ]
],[ ]
[ SCAN ]
[ AUDIO ]
Signal transmitter
Operating range: 30˚ in all directions
[ CeNET ]
[ MUTE ]
[ VOLUME ]
[ P.TIME ]
[ ]
[ ]
[ SEARCH MODE ]
[ MENU ]
[ TITLE ]
[ ],[ ]
[ ],[
[ RDM ]
[ SLOW ]
[ ANGLE ]
AA (SUM-3, IECR-6/1.5V)
Batteries
Rear side
]
[ PBC ]
Rear cover