Clarion VRX935VD Owner's Manual & Installation Manual page 55

SPEAKER GAIN
This function sets speaker output level.
This function is not available for speakers whose
SPEAKER SEL setting is set to OFF.
3-1. Touch the [SPEAKER GAIN] key to show
the submenu.
3-2. Touch the [FRONT L], [CENTER], [FRONT
R], [SURROUND R], [SURROUND L] or
[SUB WOOFER] key to set respective item.
3-3. Touch the[w] or [z] key to make adjust-
ments in the range -10 dB to +10 dB in 1
dB step increments. The default value is "0
dB".
DELAY
This function adjusts the timing of the speakers
so that they are synchronized with front speaker
output.
This function is not available for speakers whose
"SPEAKER SEL" setting is set to OFF.
3-1. Touch the [DELAY] key to show the
submenu.
3-2. Touch the [CENTER SP] or [SURROUND
SP] key to set respective item.
3-3. Touch the [w] or [z] key to adjust.
[CENTER SP]:
Adjustments are made in the range 0 ms to
5 ms. The default value is "0 ms".
[SURROUND SP]:
Adjustments are made in the range 0 ms to
15 ms. The default value is "0 ms".
DOLBY D
This function sets the dynamic range compres-
sion.
This function is not available for speakers whose
"SPEAKER SEL" setting is set to OFF.
3-1. Touch the [DOLBY D] key to show the
submenu.
3-2. Touch the [MAX], [STD] or [MIN] key to se-
lect respective item.
The default value is [MAX].
4. When all settings are completed, press the
[ADJ] button or touch the [RTN] key to return
to the previous mode.
5.1 ch Surround Decoder Operations
Output adjustment of subwoofer volume,
center volume and balance/fader
1. Press the [A-M] button and touch the
[DETAIL] key.
2. To make an adjustment on :
Subwoofer volume adjustment
2-1. Touch the [SUBWOOFER VOL] key, then
touch the [w] or [z] key to adjust to desir-
able level.
The factory default setting is "0". (Setting
range : -6 to 3)
Center volume adjustment
2-1. Touch the [CENTER VOL] key, then touch
the [w] or [z] key to adjust to desirable
level.
The factory default is "0". (Setting range : -6
to 0)
Balance/Fader adjustment
2-1. Touch the [BAL/FAD] key.
Touch the [w] or [z] key to adjust the bal-
ance level.
[w] key : emphasized the sound from the
front speakers.
[z] key : emphasized the sound from the
rear speakers.
2-2. Touch the [Å] or [Î] key to adjust the fader
level.
[Å] key : emphasized the sound from the
left speakers.
[Î] key : emphasized the sound from the
right speakers.
3. When the adjustment is complete, touch the
[RTN] key or press the [A-M] button to return
to the STANDARD screen.
59
VRX935VD