Table of Contents
Advertisement
Installing
4.5 Mounting the motor
NOTICE
Soiling impairs the torque transmission
Any soiling in the vicinity of the shaft/hub connection will have a detrimental effect on the
torque transmission.
Keep the drill hole and motor shaft completely free from grease.
Do not use soiled cleaning cloths or contaminated solvents.
Note
Dimension z12 applies for standard assignment of the coupling. If a special assignment is
required, consult the appropriate special dimension drawing.
Note
Reduce assembling force
Lightly grease or oil the gear ring tooth flanks of the flexible element 1557 or the hub.
The following are permitted:
• Mineral-oil based oils or greases
• Silicon-based lubricants
• Vaseline
Note
The force required to join the coupling halves is released after assembly, meaning that there is
no danger of excessive axial load on the bearings.
Note
The contact surfaces between adapter and motor must always be sealed using a suitable sealing
compound.
40
SIMOGEAR adapters for gearboxes - KS, K2, K3, K4, K5, KQ, KQS, K8, A, AZ
Operating Instructions, 05/2022, A5E37431501A/RS-AL
Advertisement
Table of Contents
