Basic Operation; Adjusting The Tone; Adjusting The Bass; Adjusting The Volume - Clarion XA311 Owner's Manual

5. OPERATION
Note:
• Be sure to read this chapter referring to the front diagrams of chapter 2. CONTROLS on page 3 (unfold).

Basic Operation

CAUTION
When this unit is turned on, starting and stop-
ping the engine of a car with its volume raised
to the maximum level may harm your hearing.
Be careful about adjusting the volume.
1) Press the POWER button 5.
To turn the power off, press the POWER button
*
for at least 1 second.
2) Press the FUNC button 5 to select another
operation mode. The mode switches as fol-
lows each time the FUNC button is pressed:
Radio Tape CD changer
If a component is not connected, that operation
*
mode cannot be selected.
"CASS" appears when no tape is loaded in the
*
source unit, and "DISC" appears when no disc is
loaded in the CD changer.

Adjusting the volume

Turning the Rotary knob 3 clockwise increases
the volume; turning it counterclockwise decreas-
es the volume.
The volume level is from 0 (minimum) to 33 (maxi-
*
mum).
Setting the Z-enhancer
This unit comes with 3 types of sound tone
effects stored in memory. Select the one you
prefer.
The factory default setting is "OFF".
*
Each time you press Z-EHCR button
effect changes in the following order:
"Z-ENHANCER 1"
ENHANCER 3" "OFF"
1"...
• Z-ENHANCER 1 : bass emphasized
• Z-ENHANCER 2 : treble emphasized
• Z-ENHANCER 3 : bass and treble empha-
sized
• OFF : no sound effect
6
XA311
Radio
7
, the tone
"Z-ENHANCER 2"
"Z-ENHANCER

Adjusting the tone

Press A-M button 4 and select the item to
adjust. Each time you press A-M button 4, the
item changes in the following order:
"BASS"
Function mode...

Adjusting the bass

1. Press A-M button 4 and select "BASS".
2. Turning the Rotary knob 3 clockwise
emphasizes the bass; turning it counter-
clockwise attenuates the bass.
The factory default setting is "0". (Adjustment
*
range: –6 to +6)
3. When the adjustment is complete, press A-M
button 4 several times until the function
mode is reached.
Adjusting the treble
1. Press A-M button 4 and select "TREB".
2. Turning the Rotary knob 3 clockwise
emphasizes the treble; turning it counter-
clockwise attenuates the treble.
The factory default setting is "0". (Adjustment
*
range: –6 to +6)
3. When the adjustment is complete, press A-M
button 4 several times until the function
mode is reached.

Adjusting the balance

1. Press A-M button 4 and select "BAL".
"Z-
2. Turning the Rotary knob 3 clockwise
emphasizes the sound from the right speak-
er; turning it counterclockwise emphasizes
the sound from the left speaker.
The factory default setting is "0". (Adjustment
*
range: L9 to R9)
3. When the adjustment is complete, press A-M
button 4 several times until the function
mode is reached.
"TREB" "BAL" "FAD"