Section 4. Optional Cabinet Disassembly
4.1 Disassemble cabinet for installation in tight areas or as needed.
Note: If the unit must be transported in a horizontal
position, it must be laid on its back (marked "REAR"
on carton).
Note: To reassemble cabinet, follow the steps in
reverse order. Ensure electrical connections are
secure and the plug clips are engaged.
STEP 1 - Remove all four front panels. See Section
2.2.
STEP 2 - Remove the two screws on the seal bar and
pull the seal bar straight out.
STEP 3 - Disconnect all wiring connections routed to
the blower assembly.
6
Screw locations
Blower Electrical
Connections