Table of Contents
Advertisement
MN009203A01-AA
Chapter 29 : Dynamic Zone Programming
Chapter 29
Dynamic Zone Programming
Dynamic Zone Programming (DZP) provides one or more Dynamic Zones to store frequently used
channels for conventional or trunking.
NOTE: Your radio must be preprogrammed for you to use this feature. At least one zone in the
radio must be a non-dynamic zone.
29.1
Selecting Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.
2 Press the ZnPr menu item.
3 Press Edit→List Selection→Sel.
4 Scroll to the required zone and press Sel.
5 Scroll to the required channel and press Sel.
The display shows a positive notification and the channel is added to the Dynamic Zone.
29.2
Deleting Channels in the Dynamic Zone
Procedure:
1 Enter a dynamic zone by performing the following actions:
a Press the Zone menu item.
b Select <# Dynamic Zone Channels> and press Sel.
# indicates the channel number on the 16-Position Switch that is numbered from 1 to 16.
2 Press the ZnPr menu item.
3 Scroll to the required dynamic channel and press Del.
The Home screen shows <Dynamic Zone Channels>. If the deleted channel is the home channel,
the Home screen shows <Zone Name>"Blank".
90
Advertisement
Table of Contents
