Answer On/Off - AT&T CRL32302 Complete User's Manual

Answering system
Answering system settings
To delete your outgoing announcement:
1. When the handset is in idle mode, press MENU/
2. Press q or p
CID
/SELECT again to select >Announcement.
3. Press Press
MENU
4. Press q or p
CID
screen prompts Reset to default annc?. Press
screen shows Annc. reset to default before returning to the previous menu.
-OR-
Press q or p
CID
While the announcement is playing, press
announcement. The system announces "Announcement deleted" and the
screen shows Annc. Deleted before returning to the previous menu.
When your announcement is deleted, the system answers calls with the
default announcement described on the previous page. You cannot delete
the default announcement.

Answer on/off

Unless you change it, the answering system is on and ready to record
messages. You can turn the answering system off,
but if you do so, the answering system does not
answer calls and record incoming messages.
To turn the answering system on or off:
Using the telephone base:
Press /ANS ON to turn the answering system on or off. If the answering
•
system is turned on, it announces, "Calls will be answered." If the
answering system is turned off, it announces, "Calls will not be answered."
Using a handset:
1. When the handset is in idle mode, press MENU/
to enter the main menu.
2. Press q or p
CID
press /SELECT.
MENU
3. Press q or p
CID
then press
MENU
4. Press q or p
CID
/SELECT to save the setting. You hear a confirmation
MENU
tone. Press Press
When the answering system is on, the handset screen
shows ANS ON.
to scroll to >Answering sys, then press
DIR
to scroll to >Reset annc and press
DIR
to scroll to >Play annc and play the announcement.
DIR
to scroll to >Answering sys, then
DIR
to scroll to >Answer ON/OFF,
DIR
/SELECT.
to highlight >On or >Off, then press
DIR
to cancel.
CANCEL
/
OFF
SELECT
MENU
/DELETE to reset the
MUTE
SELECT
45
to enter the main menu.
/SELECT.
MENU
/SELECT. The
MENU
/SELECT to confirm. The
Record memo
>Answer ON/OFF
ANSWER ON/OFF
>On