Error Displays - Clarion CX501 Owner's Manual

8. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
ERROR 3
ERROR 6
ERROR 7 (iPod
mode)
ERROR 7
ERROR 7
If an error display other than the ones described above appears, press the reset button. If the problem
persists, turn off the power and consult your store of purchase.
Cause
A CD is caught inside the CD
deck and is not ejected.
A CD cannot be played due
to scratches, etc.
A CD is loaded upside-down
inside the CD deck and does
not play.
The connected iPod is not
recognized.
Overcurrent detection.
Do not support the HUB
devices.
Measure
This is a failure of CD deck's mechanism and consult
your store of purchase.
Replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
Disconnect and reconnect the iPod.
Disconnect the devices and reconnect. If the devices
are still not recognized, try replacing with a different
devices.
Do not use the HUB devices.
35
CX501