Facility Prerequisites; Rigger Precautions - Milnor MWF18J8 Installation Manual

Table of Contents

Advertisement

Facility Prerequisites

Required Condition
structural support
protected storage
access to the final location
clearances for machine
movement and maintenance
operational clearances
available utilities
available drain(s)
laundry room ventilation

Rigger Precautions

CAUTION: Incorrect rigging — can cause mishaps and costly machine damage.
Protect fragile or sensitive machine components.
Prepare the foundation and install anchor bolts correctly.
Set the machine at the correct height and level.
Apply machinery grout evenly so that support is distributed.
Tighten anchors alternately so that the hold-down force is distributed.
Pellerin Milnor Corporation
Supporting Information
See document BNUUUI01 "Vital Information About the Forces
Imparted to Supporting Structures by Laundering Machines"
which can be found in the installation manual and also at
https://milnor.sharefile.com/d-s8408ba617d244d98.
If the machine must be stored temporarily, it must be protected
from dampness and excessive temperatures.
See the machine dimensional drawing, which can be found at the
end of the installation manual, for overall dimensions. Partial dis-
assembly is sometimes possible. Contact the Milnor
department.
See the dimensional drawing.
Adequate clearance around controls and for movement of laundry
equipment such as carts. See the dimensional drawing.
See the dimensional drawing and the external fuse and wire
document.
See the dimensional drawing. The drain valve(s) must have unre-
stricted access to a drain trough of sufficient capacity in the
foundation.
The machine will contribute heat and vapors to the laundry room,
which must provide adequate ventilation.
Know and accommodate the machine shipping weight.
Use only lifting eyes for crane lifting.
Use long cables or a spreader bar for crane lifting.
Leave the machine skidded as long as possible.
Installation Procedures
BNWUUI03.R01 0000254786 B.2 B.7 B.4 1/2/20 2:19 PM Released
BNWUUI03.R02 0000254785 B.2 B.7 B.6 1/2/20 2:19 PM Released
®
Service
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mwf18z8

Table of Contents