Table of Contents
Advertisement
Radio behavior
The radio sounds two short beeps.
The radio sounds two short beeps.
Failsoft Mode Operation
If the radio is unable to access the trunking system, it may be programmed to enter failsoft mode. Failsoft mode oper-
ates in one of two ways: 'radio-based' failsoft and 'infrastructure' failsoft.
Radio-based failsoft
When access to the trunking system is lost,
display shows No service.
After a short time, the radio switches to a programmed conventional communications channel.
The radio remains on that channel until you select a trunked talkgroup with access to the trunking system.
Infrastructure failsoft
The radio receives a message from the trunking infrastructure to say that the trunking system is now operating in
failsoft mode.
While in failsoft mode, the display shows Failsoft, and the radio sounds a repeating double beep. The double beep
continues until normal service is restored.
You may still be able to communicate with your dispatcher and other talkgroup members, depending on the type of
system failure that has occurred, and how your radio is programmed.
When the trunking system returns to normal operation, your radio is notified, and will attempt to register on the control
channel it was previously using.
56
Tait International Ltd July 2021
Explanation
You have attempted to made an individual call to a radio that has
never existed on the system.
You have attempted to make an individual or phone call, but you are
not authorized to do this.
Your individual or phone call has been rejected or is unanswered.
no longer appears, the bars in the RSSI icon,
, disappear and the
Advertisement
Table of Contents
