Radio Installation And Operation In Vehicles; Vehicle Charger Installation And Operation; Multicharger Safety Information - Tait TP9600 User Manual

P25 portable radio
Hide thumbs Also See for TP9600:
Table of Contents

Advertisement

include filling stations, and any environment where there are flammable liquids,
gases, or dusts.
Turn off the radio before approaching blasting caps, a blasting area, or any area
where you are instructed to turn off a two-way radio. Obey all signs and instruc-
tions. Interference with blasting operations could cause serious injury or death.

Radio installation and operation in vehicles

Keep the radio away from airbags and airbag deployment areas. Do not install,
charge, or place a radio near such areas. An activated airbag can propel a portable
radio with sufficient force to cause serious injury to vehicle occupants. An airbag
may not perform to specification if obstructed by a radio.
To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or bat-
tery cables, refer to the installation guide for the radio, and to the vehicle man-
ufacturer's manual, before installing electronic equipment in the vehicle.
Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your
country or state. Please check the vehicle regulations in your area.

Vehicle charger installation and operation

For detailed instructions necessary to the safe installation and operation of the vehicle charger, please refer to the doc-
umentation supplied with the vehicle charger.

Multicharger safety information

This device must be connected to an earthed mains socket-outlet.
14
Tait International Ltd July 2021

Advertisement

Table of Contents
loading

Table of Contents