Configure Network Settings - AGFA Drystar 4500 Plug & Play Installation Manual

15

Configure network settings

The printer is configured with the
following APIPA addresses:
Printer IP address:
Subnet mask:
1
Select and initiate the printer
installation wizard.
1. Press the Key-operator key.
1 x
2. Press the Down key six times.
3. Press the Confirm key.
4. Press the Down key once to select
6 x
'Printer install. wizard'.
5. Press the Confirm key.
1 x
6. Follow the instructions
1 x
1 x
3
Your Drystar 4500 is ready for use!
2805F EN 20050128 2805F EN 20050128
169.254.10.10
255.255.0.0
Ask your network manager
the following information:
Printer IP address:
Netmask:
Router IP address:
Called AE_Title:
2
Select and initiate printer calibration.
1. Press the Key-operator key.
1 x
2. Press the Down key five times to
select 'Calibration'.
3. Press the Confirm key.
5 x
4. Follow the instructions
1 x
E
17/18