Pair" With Your Bluetooth® Mobile Phone; Making A Call; Ending A Call; Answering A Call - Jabra SP500 User Manual

Switch off the Jabra SP500
1. Press and hold the multifunction button for approximately five seconds
until you hear the shut down melody and the LED light has been switched
off completely.
4
"Pair"² with your Bluetooth mobile phone
1. Ensure SP500 is switched on. (See section 3)
2. Press the pairing button until you see a solid blue light (approximately
two seconds), then release. Your speakerphone is now in pairing mode.
3. Set your Bluetooth phone to "discover" the speakerphone by following
your phone's instruction guide. Typically, the steps involve going to a
"setup, " "connect, " or "Bluetooth" menu on your phone and then selecting
the option to "discover" a Bluetooth device*. (See example from a typical
mobile phone in fig. 2)
4. Your phone should find the "Jabra SP500" speakerphone and ask if you
want to pair with it. Confirm by pressing "yes" or "ok. "
5. Enter passkey or PIN³ = 0000 (4 zeros), then press "yes" or "ok. "
IMPORTANT: If pairing was successful, the blue indicator light will briefly
flash rapidly before going back to flashing blue every three seconds. You will
also hear the confirmation melody. If unsuccessful, the blue light remains
solid, and you'll need to re-attempt pairing. (See steps 3–5 above)
USING YOUR Jabra SP500
Before using your Jabra SP500, ensure that the batteries are charged and the
Jabra SP500 is paired (see item 3) with your Bluetooth mobile phone and
switched on.
The speakerphone can be used while being recharged from a wall socket or
from the car charger.
5

Making a call

Using your mobile phone's keypad
1. Dial number on keypad.
2. Press phone's "send" key.
3. The Jabra SP500 has automatic volume control and will automatically
adjust the speaker volume based on the relevant background noise. In
order to adjust the volume according to your own preferences, use the
volume control wheel.
4
Using voice-dialing (if supported by your phone)
1. Press and release once. You'll hear one short beep while doing this.
2. You'll then hear the voice-activation tone; say the name of the person you
wish to call.
NOTE: Record voice tag via your mobile phone. If you have a Nokia phone you
will be able to record the voice tags via your speakerphone.
6

Ending a call

• Press and release once.
OR
• End call from your mobile phone's keypad.
7

Answering a call

• After you hear the ring tone, press and release
OR
• Answer the call with your mobile phone's keypad. You may then need to
transfer the call to the speakerphone by pressing and releasing
(depending on your phone).
8

Muting a call

• To enable mute press the mute button for one second and you will hear a
short beep. You'll see a solid yellow light.
• To disable mute function press the mute button briefly.
9

Call-waiting*

• It is recommended that you use your mobile phone's keypad which
typically involves pressing the "send" button.
OR
• Press and hold
until you hear two beeps to answer the incoming call
and switch between calls (some phones do not support call-waiting via this
method).
* See Enhanced features section for alternative call-waiting instructions
for mobile phones that support the hands-free profile. See section 13 for
further details about Bluetooth profiles.
once.
once
5