Advertisement
Thank you for purchasing the Jabra Speak 510.
We hope you will enjoy it!
JABRA SPEAK 510 FEATURES
*Newer Speak 510 variants (with the Smart button) have a Ver. ID beginning with D, or later. Older Speak 510 variants (without the Smart button) have a Ver. ID beginning with A, B, or C.
Newer Speak 510+ variants (with the Smart button) have a Ver. ID beginning with F, or later. Older Speak 510+ variants (without the Smart button) have a Ver. ID beginning with A, B, C, or D.
The Ver. ID can be found on the bottom of the Speak 510.
Plug the Jabra Speak 510 USB cable into any available USB port on your computer to charge the battery. The battery light is red when charging, and green for 1 minute when fully charged.
If using a Jabra Speak 510+, the speakerphone and Jabra Link 370 are pre-paired and ready to use out of the box.
To connect the speaker and Jabra Link 370:
NOTE: Ensure that all Bluetooth devices previously connected to the Jabra Link 370 are switched off.
For privacy, a bluetooth headset can be connected to the Jabra Speak 510.
On/Off | Press and hold (2 secs) the On/Off button until the lights flash | |
Answer call | Tap the Answer call button | |
End call | Tap the End/reject call button | |
Reject call | Tap the End/reject call button | |
Speaker volume | Tap the Volume up or Volume down button | |
Battery status | Tap the Battery status button to display the current battery level | |
Connect with new Bluetooth device | Press and hold (2 secs) the Bluetooth button to connect with a new Bluetooth device | |
Reconnect/ disconnect with Bluetooth device | Tap the Bluetooth button to reconnect/disconnect with a Bluetooth device | |
Mute microphone | Tap the Mute microphone button | |
Voice assistant (off by default, Smartphone dependent) | Press the Smart button (use Jabra Direct to enable voice assistants, e.g. Siri, Google Assistant, Cortana) | |
Speed dial (off by default, computer or Smartphone dependent) | Press the Smart button (use Jabra Direct to enable speed dial) |
The Jabra Speak 510 can accept and handle multiple calls simultaneously.
Put current call on hold and answer incoming call | Tap the Answer call button | |
Switch between held call and active call | Tap the Answer call button | |
Reject incoming call | Tap the End/reject call button |
To turn voice guidance on/off, press and hold (8 secs) the Mute button until you hear 'Voice guidance off' or 'Voice guidance on'.
NOTE: Not all voice prompts will be disabled when voice guidance is turned off.
The Smart button is off by default.
To use the Smart button to activate your smartphone's voice assistant (e.g. Siri, Google Assistant, Cortana) or to speed dial a phone number on your smartphone or computer, install Jabra Direct on your computer and enable the Smart button in the Speak 510 settings.
Jabra Direct is software designed to support, manage and enable optimal functionality for Jabra devices. It is highly recommended to download and install Jabra Direct.
Download the latest version - jabra.com/direct
Firmware updates improve performance or add new functionality to Jabra devices.
To update firmware:
View the FAQs on Jabra.com/speak510.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Jabra Speak 510 - Bluetooth & USB Speakerphone Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Speak 510 that isn't answered in the manual? Leave your question here.