Charging - Panasonic ER-HGP82 Operating Instructions Manual

Charging

• Turn the appliance off.
1
Connect the appliance plug
to the stand socket.
2
Place the appliance on the
charging stand.
3
Insert the adaptor into a
household outlet.
• Charging is completed after
approx. 1 hour.
• Check the charge status lamp
( ) glows.
4
Disconnect the power plug after charging is
completed.
(for safety and to reduce energy usage)
• Charging is required when the recharge
lamp blinks.
• The appliance can be used for
approximately 5 minutes after the recharge
lamp blinks.
10
When charging starts
3
2
Charge status lamp
1
Notes
• If there is noise from the radio or other sources while using or
charging the appliance, move to a different location to use the
appliance.
• The battery will deteriorate if not used for over 6 months, so
make sure to perform a full charge at least once every 6 months.
• The charging time may differ when using the appliance for the
first time, or if it has not been used for more than 6 months. The
lamp on the appliance may not glow for several minutes when
first starting charging, but will glow when continuing to charge.
• Recommended ambient temperature for charging is
10 °C – 35 °C. It may take longer to charge, or the charge status
lamp will blink quickly and the battery may fail to charge properly
in extremely high or low temperatures.
• 1 full charge will provide approximately 50 minutes of continuous
operation. (Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the frequency of use
and the operating method.
• The battery used is a lithium‑ion, so charging after every use will
have no effect on battery life.
When charging is
completed
The charge status
lamp blinks once
glows.
every second.
10 minutes
after charging
is completed
The charge status
lamp blinks once
every 2 seconds.