Charging - Panasonic ER-HGP72 Operating Instructions Manual

Charging

• Turn the appliance off.
1
Connect the appliance plug
to the stand socket.
2
Place the appliance on the
charging stand.
3
Insert the adaptor into a
household outlet.
• Charging is completed after
approx. 1 hour.
• Check the charge status lamp
( ) glows.
4
Disconnect the power plug after charging is
completed.
(for safety and to reduce energy usage)
• Charging is required when the recharge
lamp blinks.
• The appliance can be used for
approximately 5 minutes after the recharge
lamp blinks.
10
When charging starts
2
Charge status lamp
3
1
Notes
• If there is noise from the radio or other sources while using or
• When the appliance is not used for 6 months or more, the battery
• When charging the trimmer for the first time or when it has not
• Recommended ambient temperature for charging is
• 1 full charge will provide approximately 50 minutes of continuous
• You can charge the battery before it is completely discharged.
When charging is
completed
The charge status
lamp blinks once
glows.
every second.
charging the appliance, move to a different location to use the
appliance.
will weaken (leak battery fluid, etc.). Fully charge the battery
once every 6 months.
been in use for more than 6 months, the lamp on the main body
may not glow for a few minutes, or the operating time may
shorten. Please charge it for more than 8 hours in such cases.
0 °C – 35 °C. It may take longer to charge, or the charge status
lamp will blink quickly and the battery may fail to charge properly
in extremely high or low temperatures.
operation. (Based on dry using at 20 °C – 30 °C)
The operating time may differ depending on the frequency of use
and the operating method.
However, it is recommended to charge when the battery is
completely discharged. The battery life depends strongly on
factors such as how it is used and stored.
10 minutes
after charging
is completed
The charge status
lamp blinks once
every 2 seconds.