Controls
Description
e
To restart the device, press the
Reset button for less than 5
Reset but-
seconds.
ton
e
To reset the passwords, press
and hold the Reset and CTRL
buttons for between 5 and 10
CTRL but-
seconds.
ton
e
To reset the device to the fac-
tory settings, press and hold
the Reset and CTRL buttons
for more than 10 seconds. This
overwrites all current settings.
USB connection
USB con-
nection
e
For information on network connection options,
refer to the installation instructions of the Por-
sche Home Energy Manager on the Porsche
website at the following address:
https://tinyurl.com/porsche-e-help
Operating
Operating by the home user
The Web Application offers an extensive range of
configuration options. Seek further advice from the
qualified electrician performing the installation and
read the information provided in Web Application.
The following steps should already have been per-
formed by a qualified electrician, so that the Web
Application can be correctly used:
b The initial installation with the necessary set-
tings in the installation assistant of the Web Ap-
plication was performed.
b The home installation was performed, including
information on the mains supply, mains phases,
current converters and current consumers.
e
If these steps have not been carried out or have
not been completed fully, contact your electri-
cian.
Web Application Open
Requirements for opening the Web Applica-
tion
The following information should be available for the
application of the Web Application:
–
Access data letter for logging on to the Web
Application
–
Access data for your home network
–
IP address or host name of the energy manager
The Web Application supports the following brows-
ers:
–
Google Chrome version 57 or later (recommen-
ded)
–
Mozilla Firefox version 52 or later (recommen-
ded)
–
Microsoft Internet Explorer version 11 or later
–
Microsoft Edge (recommended)
–
Apple Safari version 10 or later
Establish connection to the energy manager
The energy manager can be integrated into your
existing home network (WiFi, Powerline Communica-
tion, Ethernet) during installation. After that, the Web
Application with the assigned IP address can be ac-
cessed.
If it is not integrated in a home network, the hotspot
of the energy manager can be used as an alternative.
It is also possible to use the WPS function, which
couples the energy manager to the existing home
network without entering a password, e.g. to a net-
work router.
A direct connection to the router via an Ethernet
cable is recommended, alternatively a PLC coupling
with a PLC modem.
For information on establishing network connections,
see
g Installation Instructions for the Home Energy Man-
ager.
Operating
25