Important For Laser Products - JVC VS-DT6 Instructions Manual

Caution — % % switch! % %
Disconnect the mains plug to shut the power off completely (the
% goes off). % % %
The % % % % switch in any position does not disconnect the mains
line.
When the unit is on standby, the %
•
• When the unit is turned on, the operation lamps light red.
The power can be remote controlled.
CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1 Do not remove screws, covers or cabinet.
2 Do not expose this appliance to rain or moisture.
CAUTION
1. Do not block the ventilation openings or holes.
(If the ventilation openings or holes are blocked by a news-
paper or cloth, etc., the heat may not be able to get out.)
2. Do not place any naked flame sources, such as lighted
candles, on the apparatus.
3. When discarding batteries, environmental problems must
be considered and local rules or laws governing the dis-
posal of these batteries must be followed strictly.
4 Do not expose this apparatus to rain, moisture, dripping or
splashing and that no objects filled with liquids, such as
vases, shall be placed on the apparatus.
Caution: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
1 Top: No obstructions and open spacing.
2 Sides/ Front/ Back: No obstructions should be placed in the
areas shown by the dimensions below.
3 Bottom: Place on the level surface. Maintain an adequate
air path for ventilation by placing on a stand with a height of
10 cm or more.
CAUTION
I I I I
About the Internal Cooling Fan
This unit includes an internal cooling fan, so as to allow for high-
power operation within a small space.
This fan comes on when the sound level is set high, and may
also come on even at low sound levels if the internal temperature
rises. To ensure effective fan operation, please leave at least
1cm clearance on each side of the unit.
Front view
15 cm
1 cm
15 cm
(Vertical position)
G-1
Warnings, Cautions and Others
% lights red. % %
1 cm
COMPACT COMPONENT SYSTEM

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS
1 CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE
2 WARNING LABEL, PLACED INSIDE THE UNIT
CAUTION: Invisible laser
radiation when open and
interlock failed or defeated.
AVOID DIRECT EXPOSURE
TO BEAM.
1 CLASS 1 LASER PRODUCT
2 CAUTION: Invisible laser radiation when open and inter-
lock failed or defeated. Avoid direct exposure to beam.
3 CAUTION: Do not open the top cover. There are no user
serviceable parts inside the Unit; leave all servicing to qual-
ified service personnel.
15 cm
15 cm
15 cm
10 cm
CLASS 1
LASER PRODUCT
VARNING: Osynlig laser-
ADVARSEL: Usynlig laser-
stråling ved åbning, når strålning när denna del är
sikkerhedsafbrydere er ude öppnad och spärren är
af funktion. Undgåudsæt- urkopplad. Betrakta ej
(e) telse for stråling. (d) strålen.
1 cm
C O M P A C T C O M P O N E N T S Y S T E M
(Horizontal position)
VARO: Avattaessa ja
suojalukitus ohitettaessa
olet alttiina näkymättö-
mälle lasersäteilylle.
(s) Älä katso säteeseen. (f)
15 cm
1 cm
10 cm