Timer Operations; Setting The Timer - JVC UX-G50 Instructions Manual

Remote control
CLOCK/
TIMER
21

Timer Operations

Setting the Timer

Using Daily Timer, you can wake up with music, etc.
• You can store three Daily Timer settings; however, you can
activate only one of Daily Timers at the same time.
• To exit from the timer setting, press CLOCK/TIMER as
required.
STANDBY/ON
• To correct a misentry during the process, press CANCEL.
You can return to the previous step.
SET/RESUME
CANCEL
How Daily Timer actually works
Once the Daily Timer has been set, the timer (
PRESET UP,
indicator and timer number indicator (1, 2, or 3) are lit on
PRESET DOWN
the display. Daily Timer is activated at the same time
everyday until the timer is turned off manually or another
Daily Timer is activated.
When the on-time comes
The System turns on, tunes in to the selected station or
start playing the selected disc, and sets the volume level
to the preset level.
• If "P – – –" is selected, the last tuned station is selected.
• If "VOL – –" is selected, the last specified value is
selected.
• While Daily Timer is working, the timer (
timer number indicators (1, 2, or 3) flash on the display.
• The timer setting remains in memory until you change
it.
• Without canceling the Daily Timer, you can change the
source or adjust the volume after Daily Timer starts
playback.
1
Select one of the timer setting modes you want to set—
Daily 1 Timer, Daily 2 Timer, or Daily 3 Timer.
CLOCK
/TIMER
Ex.: When Daily Timer 1 setting mode is selected
Remote
ONLY
Daily 1 Timer Daily 2 Timer
Canceled Clock setting
)
) and
Daily 3 Timer
(see page 16)