Playing Back A Disc - JVC UX-G50 Instructions Manual

To tune in to a preset station
1
Select a band (FM or AM).
2
Select a preset number for the station you store.
1 2 3
4 5 6
8 9
7
0 10

Playing Back a Disc

This System can play back the following discs—regular CD
and CD-R/CD-RW (recorded either in the audio CD or MP3
format).
Disc Type
Audio CD
CD-R
CD-RW
• Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply with
the "Compact Disc Digital Audio" standard. Therefore, the
use of Non-DVD side of a DualDisc on this product may
not be recommended.
Main Unit
ONLY
To insert a disc
You can insert discs while playing another source.
To close the disc tray, press the same 0 again.
• When the current disc tray is open, pressing CD 6 closes
the tray and the playback starts.
• When you press 0 for the next tray you want to place
another disc onto, the first disc tray automatically closes
and then the next tray comes out.
11
Remote
ONLY
FM AM
• You can also use the
PRESET UP or
PRESET DOWN.
Mark (logo)
To select a disc to be played back
• The same operation can be
CD 1 CD 2 CD 3
CD 4 CD 5
To start: To pause:
To release, press again.
To select a track/group*
Increases the track/group*
numbers.
Decreases the track/group*
numbers.
* For details about the group selection, see "For MP3
playback" on page 12.
To locate a particular portion
While playing a disc, press and hold until the portion you
want is reached.
Fast-forwards the track.
Fast-reverses the track.
* No sound is played during this operation on MP3 discs.
To locate a track directly and
start play
Examples:
To select track number 5, press 5.
1 2 3
To select track number 15, press
4 5 6
To select track number 30, press
8 9
7
(For MP3 discs with 100 or more
0 10
tracks)
To select track number 125, press
* For up to 99 tracks, you can
carried out using CD1 to CD5
on the system.
To stop:
Remote
ONLY
10 → 1 → 5.
10 → 3 → 0.
10 twice → 1 → 2 → 5.
press 10 twice to turn to the
condition before 10 is
pressed.