Using Instashare Wireless Solution; Installing The Wireless Adapter; Pairing A Button To The Wireless Adapter - BenQ InstaShare User Manual

Using InstaShare Wireless Solution

Installing the Wireless Adapter

To begin using InstaShare Button, you must first install the Wireless Adapter to a Type-A USB port
on your display. Though the Wireless Adapter is compatible with USB 2.0 ports, it is recommended
that you install it to a USB 3.0 or above port (if available) on your display.
USB-A

Pairing a Button to the Wireless Adapter

A product set includes two Buttons, which are already paired with the supplied Wireless Adapter
before shipment. If you want to use a newly purchased Button or a Button that has already been
paired with another Wireless Adapter, you will need to follow the instruction below in order to pair
the Button with the current Wireless Adapter.
To pair a Button with the Wireless Adapter:
1. Make sure that the Wireless Adapter is installed on your display and that the display is powered
on.
2. In the Network tab of the OSD settings menu on the display, enable WLAN Hotspot.
WLAN
Hotspot
Using InstaShare Wireless Solution 9