Logging Into The Web Management Interface Via Lan; Logging Into The Web Management Interface Via A Wireless Network - BenQ WDC20C User Manual

Table of Contents

Advertisement

Logging into the web management interface via LAN

If your Host is connected to your LAN, you can enter the IP Address shown on the screen via a web
browser.

Logging into the web management interface via a wireless network

The product supports 802.11 ac/n. It is compatible with most devices with Wi-Fi capability (e.g.
laptop or mobile devices), you can locate the Host via the WDC20_xxxxxx SSID (shown in the
Guide/Idle screen) in your laptop or mobile device's wireless network menu and connect to it. The
default password is the same as the name of the SSID (for example, if the SSID is "WDC20_c7a3ae",
the password will be "WDC20_c7a3ae"). When the device is connected to the Host, enter the IP
Address, "192.168.168.2" in a web browser, then enter the user name and password as shown in step
4 of
Logging into the web management interface via direct connection on page
34.
The following is an example of how you can log into the web management interface via a mobile
device with IEEE 802.11ac.
Web management
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

Instashow s

Table of Contents