Overview; Button; Led Indicator For The Button - BenQ InstaShare User Manual

Overview

Button

3

LED indicator for the Button

Please refer to the table below for detailed indicator and status descriptions for the Button.
LED Behavior
Off
Solid white
Flashing green
Solid green
Breathing green
Flashing blue
Solid blue
Breathing blue
Flashing red
Quick flashing red
Breathing red
8 Introduction
1. Present key with LED indicator
Press to start or stop presenting.
2. Split-screen key
Press to toggle between enlarged view or regular
1
view during split-screen presentations.
3.
USB-C connector
2
Connect to a computer or laptop.
The Button is powered off.
The Button is in standby mode.
The Button is in the process of connecting to the Wireless Adapter.
The Button is connected and ready to present.
The Button is waiting for approval to present.
The InstaShare 2 app on BenQ Smart Displays allows you to configure
presentations to require approval before a button can begin presenting.
When this setting is enabled, the LED on the button will exhibit this
behavior once the present key on the Button is pushed until approval is
granted.
The Button is in the process of pairing.
The Button is presenting.
The Button is currently unable to present (e.g. the Button is in do-
not-disturb mode, max. number of presenters has been reached,
etc).
The Button is unable to connect to the Wireless Adapter.
The Button has not been activated.
The Button is inserted into its device but the USB Type-C port is
not transmitting a signal (the USB Type-C port does not support
ALT mode)
Status description