Table Of Contents - JVC KA-F5602U Instructions Manual

Thank you for purchasing this
KA-F5602U / KA-5603U Studio Kit.
This product is a kit meant for converting JVC's KY-F560 video camera into a studio camera.
Model designation may differ depending on whether the Studio Kit is equipped with a SDI
(Serial Digital Interface) terminal.
Model
KA-F5602U
KA-F5603U
Main Features
● Equipped with analog 26P camera connector
Connecting to Remote Control Unit RM-P210, which is sold separately, this unit could be
controlled from up to a distance of 100 m away. In this case, power for the camera is
provided by the remote control unit and thus there is no requirement for a separate power
supply for the camera.
● Multi-system output
From the 26P camera connector, besides the composite signal, another video signal
which could be either RGB component, Y/Cb/Cr component, or YC separate signal could
be outputted. (Selectable by menu switch.)
● Possible to install VF-P400 4-inch Viewfinder
● Equipped with intercom terminal
With the use of headset, communications with remote control unit operator is possible.
● Equipped with prompter output terminal
Prompter video from the remote control unit could be outputted in the form of composite
signal.
● H phase and SC phase could be adjusted during synchronization. (Using menu screen)
● Equipped with SDI output terminal (Only for KA-F5603U)
Camera video is output as serial digital video signal (SMPTE259M-compliant).
6
SDI Output Terminal
Nil
Yes
Contents
Getting Started
Accessories ........................................................................................................ 8
Related Products used in Conjunction with this Unit .......................................... 8
Precautions ......................................................................................................... 9
Regarding Gain-lock Signal and adjustment of System Phase .......................... 9
Part Names and Functions ............................................................................... 10
Installation
System .............................................................................................................. 13
Installation Procedures ..................................................................................... 14
Mounting KY-F560 Camera on this Unit ........................................................... 14
Mounting the Lens onto the Camera ................................................................ 16
Mounting this Unit onto the Tripod .................................................................... 16
Mounting VF-P400 4-inch Viewfinder on this Unit ............................................ 17
Connecting RM-P210
Connecting to Remote Control Unit RM-P210 .................................................. 18
Notes to be taken when operating RM-P210 .................................................... 20
Menu Screen
"SYSTEM" Menu Screen .................................................................................. 21
"DISPLAY" Menu Screen .................................................................................. 22
Others
Specifications ................................................................................................... 23
7