Table of Contents
Advertisement
Using the Remote Control Unit
Battery Installation
Press the tab to remove the cover of the
battery compartment.
Notes:
Misuse of batteries could result in leakage. This could cause a fire or explosion.
To prevent this, pay special attention to the following points:
Battery
1. Be sure to insert the batteries with correct positive "+" and negative "-" polarities.
Precautions
2. Do not heat, disassemble or short-circuit batteries and never dispose of batteries by throwing them in a fire.
3. Do not use new and old batteries together.
• Also read the caution displayed on the battery when in use.
*The provided batteries are for checking operation only.
Transmitted beam effective area
AV selector
Remote sensor
window
Approx. 60˚
(MONITOR SELECT)
Remote control unit
Insert two "AA"(R6, UM-3) dry-cell
batteries.
Within 5 m
POWER
SOURCE
SELECT
1
2
3
4
DUBBING LOCK
LINK
Replace the cover.
(MONITOR SELECT)
Notes:
• If the remote controllable distance between the
remote and main unit decreases, the batteries are
depleted and should be replaced with new ones
— ("AA"-size (R6/UM-3) batteries.
• JVC uses two types of the remote control signal
code for operating the AV selector—A and B. This
remote control unit can transmit B code signals.
9
EN-
Advertisement
Table of Contents
