JVC JX-S333-J Instructions Manual page 17

• Turn on the power to the JX-S333.
• Turn on the TV monitor and select the input connected to the MONITOR OUT connectors on the JX-S333.
Preparation
• Turn on the power to all other connected components.
POWER
SOURCE
SELECT
1 1
Selecting VCR 1
2
3
4
5
Selecting DVD player
DUBBING LOCK
LINK
(MONITOR SELECT)
4
Set the dubbing lock mode
1
To exit from dubbing lock mode:
• Press DUBBING LOCK again.
• When the input source is changed by pressing one of the
SOURCE SELECT buttons in the dubbing lock mode, the
video displayed on the TV monitor connected to the MONI-
TOR OUT connectors can be changed without affecting the
video being dubbed.
Notes:
• Some video software may contain signals to prevent it from being copied. If you try to copy such a program, the results will not
be viewable.
• Recording of copyrighted material for purposes other than personal use is illegal without permission of the copyright holder.
• While the DUBBING LOCK function is activated, the power cannot be turned off and the LINK button does not work.
(MONITOR SELECT)
5 4
1
Press SOURCE SELECT "1" to select
.
VCR1 as the source component.
• The indicator lights in red.
1
• If the SOURCE SELECT "1" indicator on
the JX-S333 is already lit, it is not required
to press the SOURCE SELECT "1" button.
2
Start playback of VCR1.
.
• The VCR1 playback video is displayed on the TV
monitor screen.
PLAY
3
Start recording of VCR2.
.
4
Press DUBBING LOCK to set the
.
dubbing lock mode.
• The indicator lights in red.
DUBBING LOCK
( MONITOR SELECT )
5
Press SOURCE SELECT "3" to
.
watch the playback picture
through the DVD player.
• The SOURCE SELECT "3" indicator lights in red.
• The playback picture through the DVD player is
displayed on the TV monitor screen.
3
PLAYPlayback video
REC
DBS video
EN-
17