Watching A Video Program While Recording Another One (Dubbing Lock) - JVC JX-S333-J Instructions Manual

Watching a Video Program While Recording Another One
Do not connect the AC power cord until all other connections have been made.
Connect the playback VCR (VCR 1) to the INPUT 1, and the recording VCR (VCR 2) to the OUTPUT
2. In addition, connect the DBS tuner to the INPUT 4.
• With these connections, you can dub a tape while watching the DBS program.
This shows an example of several possible connections. Also refer to the instruction books of the other components you are using
for operation and connection details.
VCR1 (Playback deck)
VCR2 (Recording deck)
Connection tips
• Before making any connections, turn off the power to all
components.
• The INPUT 1 and INPUT 2 connectors are used for
connecting the playback/recording components. Incoming
signals from the INPUT 1 and INPUT 2 connectors are
emitted through the MONITOR OUT connectors and at the
same time...
–Signals from the INPUT 1 connectors are emitted through
the OUTPUT 2 connectors.
–Signals from the INPUT 2 connectors are emitted through
the OUTPUT 1 connectors.
14
-EN
Playback picture Program picture
• Connect to the OUTPUT 1
connectors on the JX-S333 so
that VCR 1 can be used as a
recording machine. (Connect
the output connectors on VCR
2 to the INPUT 2 connectors
on the JX-S333.)
JX-S333
rear panel
(green)
(blue)
(red)
(white)
(red)
: Flow of VCR1 signal
: Flow of DBS signal
Recording picture
• The INPUT 3 and 4 connectors are used only for
connecting the playback components. Incoming signals
from these connectors are emitted through all the output
connectors at the same time. DO NOT connect the input
connectors of the components connected to these
connectors to any of the output connectors of the JX-S333.
• It is not required to connect the components using both S-
VIDEO and component video connectors. To obtain the
best possible playback picture on the TV monitor, connect
the component using the component video connectors.
However, to dub the tapes, it is required to connect the
playback components through the S-VIDEO connectors.
(Dubbing Lock)
DBS tuner
To Component Video Input
(green)
(blue)
(red)
To AUDIO Input
(white)
TV monitor
(red)
To S-VIDEO Input
Program picture