JVC LD-HD1KE Instruction Manual
JVC LD-HD1KE Instruction Manual

JVC LD-HD1KE Instruction Manual

Av hub processor

Advertisement

Quick Links

Machine Models Compatible for Connection with this
Product
DLA-HD10K Series
This product (LD-HD1KU/LD-HD1KE) is exclusively for the above-
mentioned model. The performance cannot be guaranteed when
using with other models.
This processor is used as a dedicated machine and this manual
(instruction manual) may contain description of features as well as
specifications not used by the processor.
AV HUB PROCESSOR
PROCESSEUR AV CENTRAL
LD-HD1KU
LD-HD1KE
®
STANDBY
POWER
INFO
CURTAIN
OUTPUT
SETUP
ON/OFF
TEST PATTERN
CONFIG
PICTURE
CONTROL
DISPLAY
VIEWING
INPUT
PROFILES
MODES
ASPECT
RATIO
INPUT
MEMORIES
ADJUST
MENU
EXIT
ENTER
BORDER
CROP
ZOOM
PAN
ASPECT
HDMI 1
4:3
16:9
SDI
HDMI 2
COMP 1
S-VIDEO 1
VIDEO 1
HDMI 3
COMP 2
S-VIDEO 2
VIDEO 2
HDMI 4
RGBHV
AUTO
INPUT SELECT
For Customer use :
Enter below the serial No. which is located
on the side panel of the cabinet. Retain
this information for future reference.
Model No.
LD-HD1KU
Serial No.
Appareils compatibles pouvant être connectés à ce
produit
Séries DLA-HD10K
Ce produit (LD-HD1KU/LD-HD1KE) est compatible uniquement avec le
modèle indiqué ci-dessus. Il est impossible de garantir la performance
avec d'autres modèles.
Ce processeur doit être utilisé tel un appareil spécialisé; il est possible
que certaines des fonctions et spécifications décrites dans le présent
manuel de directives ne puissent pas être utilisées avec ce processeur.
INSTRUCTIONS
MANUEL D'INSTRUCTIONS
Pour utilisation par le client :
Entrer ci-dessous le N° de série qui est situé
sur le panneau latéral du coffret. Garder cette
information comme référence pour le futur.
N° de modèle
N° de série
LD-HD1KU
LCT1980-001A

Advertisement

Table of Contents
loading

Summary of Contents for JVC LD-HD1KE

  • Page 1 Machine Models Compatible for Connection with this Product DLA-HD10K Series This product (LD-HD1KU/LD-HD1KE) is exclusively for the above- mentioned model. The performance cannot be guaranteed when using with other models. This processor is used as a dedicated machine and this manual (instruction manual) may contain description of features as well as specifications not used by the processor.
  • Page 2: Safety Precautions

    FCC INFORMATION (U.S.A. ONLY) CAUTION: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital devices, pursuant to Part 15 of the FCC Rules.
  • Page 3 - Do not overload wall outlets, extension cords, or conve- nience receptacles on other equipment as this can result in a risk of fire or electric shock. - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
  • Page 4 Er kunnen boetes gelden voor een onjuiste verwijdering van dit afval, in overeenstemming met de nationale wetgeving. (Zakelijke gebruikers) Bezoek als u dit product wilt weggooien onze website www.jvc- europe.com voor informatie over het terugnemen van het product. [Landen buiten de Europese Unie]...
  • Page 5 De acuerdo con la legislación nacional, podrían aplicarse multas por la eliminación incorrecta de estos desechos. (Empresas) Si desea desechar este producto, visite nuestra página Web www.jvc-europe.com para obtener información acerca de la reti- rada del producto. [Otros países no pertenecientes a la Unión Europea] Si desea desechar este producto, hágalo de conformidad con la...
  • Page 6 Det kan hända att du bötfälls i enlighet med ert lands lagstiftning om detta avfall kasseras på fel sätt. (Företagsanvändare) Om ni vill kassera denna produkt, besök vår webbsida www.jvc- europe.com för att få information om returnering av produkten. [Övriga länder utanför den Europeiska gemenskapen] Om du vill kassera denna produkt, ska detta göras i enlighet med...
  • Page 7 административным правонарушением. (Организации-пользователи) Прежде чем выбрасывать данный продукт, ознакомьтесь с информацией о приемке отработавших продуктов, приведенной на веб-узле www.jvc-europe.com. [Страны, не входящие в Европейский Союз] Если Вы собираетесь выбросить данный продукт, руководствуйтесь национальным законодательством или другими правилами, действующими в Вашей стране по...
  • Page 8: Table Of Contents

    TABLE OF CONTENTS SAFETY PRECAUTIONS... 2 TABLE OF CONTENTS ... 8 Accessories/Controls and Features... 9 Accessories...9 FRONT...9 REAR ...10 Remote Control ...12 Installation and Connection ... 15 Precautions for Installation...15 Connecting to Devices ...16 Turning on the power ...17 Basic Operation Procedures... 18 Setting the Output ...18 Screen (Onscreen) Display and Operation ...19 Adjustments and Settings Using Menus ...
  • Page 9: Accessories/Controls And Features

    If any item is missing, please contact your dealer. Instructions...x 1 Guarantee ...x 1 Power Cord (LD-HD1KU) ...x 1 (LD-HD1KE) ...x 1 (for European continental countries) (LD-HD1KE) ...x 1 (for United Kingdom) AC Adapter ...x 1 HDMI-DVI Cable...x 1 Remote Control ...x 1 AAA size Batteries (for operation confirmation)...x 2...
  • Page 10: Rear

    Accessories/Controls and Features (continued) REAR Y(G) INPUT OUTPUT INTPUT H D M I [SDI INPUT] Terminal Not used. [ANALOG VIDEO INPUT] Terminal (Y(G), Pb(B), Pr(R), H and V BNC Terminals) For input of color difference component signals and analog RGB signals. [SYNC INPUT 1/2] Terminal (RCA Terminal) For sending RGB signal input to the [COMPONENT INPUT 1/2] terminal as synchronous signals.
  • Page 11 Signals corresponding to each terminal are listed in the table below. Input Terminal Video VIDEO INPUT 1/2 NTSC, PAL, PAL-M, SECAM S-VIDEO INPUT 1/2 COMPONENT INPUT 1/2 480i, 480p, 576i, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz SYNC INPUT 1/2 (YPbPr/RGBS) 480p, 576p, 720p/50 Hz, 720p/60 Hz, 1080i/50 Hz, 1080i/60 Hz ANALOG VIDEO INPUT...
  • Page 12: Remote Control

    Accessories/Controls and Features (continued) Remote Control Some buttons may not function depending on your input source or unit’s settings. STANDBY INFO CURTAIN OUTPUT SETUP ON/OFF TEST PATTERN CONFIG PICTURE DISPLAY VIEWING CONTROL PROFILES MODES MEMORIES INPUT ADJUST MENU ENTER BORDER ZOOM ASPECT HDMI 1...
  • Page 13 [CURTAIN] Button Press this button to temporarily hide the video image. [POWER] Button Press to turn the unit On when it is in the standby mode. Test Pattern Button [ON/OFF] Button Displays the test pattern or turns off the display. [H] and [I] Buttons Switches the test pattern.
  • Page 14 Accessories/Controls and Features (continued) Load batteries into the remote control. If the remote control starts to function erratically, replace the batteries with new ones. Open the back cover To open, push the top of the back cover towards you. Load the batteries Insert the 2 (AAA) batteries supplied according to the F, G marks.
  • Page 15: Installation And Connection

    Installation and Connection Precautions for Installation Please read the following carefully when installing this unit. Installation Environment This unit is a precision device. Do not install it at the following places. Doing so may cause fire or malfunction of the unit. ●...
  • Page 16: Connecting To Devices

    Installation and Connection (continued) Connecting to Devices Before connection, be sure to turn off both this unit and the device to be connected. Connecting to Input Devices ● Exclusive connection cables and adapters may be required for the connection of some devices. Refer to the instruction manual on the device to be connected for details.
  • Page 17: Turning On The Power

    Attach the power cord to the AC adapter Insert the power cord into the power outlet ● The following message is displayed on the LCD for about 3 seconds. JVC LD-HD1K Powered by ABT Perform the following procedures to switch this unit to the operating mode if the Status LED does not light up.
  • Page 18: Basic Operation Procedures

    Basic Operation Procedures Setting the Output The factory settings of this unit are as follows. ● Input terminal selection: Auto (Detects input signals sent to the input terminal automatically.) ● Output terminal selection: HDMI (Digital) (Outputs as RGB 4:4:4 signals.) Follow the procedures below to set the output if the screen does not appear when in the default state.
  • Page 19: Screen (Onscreen) Display And Operation

    Screen (Onscreen) Display and Operation As the menu is displayed on top of the video image, it is possible to check the image while altering the settings. If the video image disappears, restore the original settings while monitoring the LCD. INPUT SELECT INPUT ASP.RATIO INPUT ADJUST...
  • Page 20: Adjustments And Settings Using Menus

    Adjustments and Settings Using Menus The menus of this unit form a structure as shown below. The menu is displayed on the LCD as well as the screen through the projector that is connected to this unit. Menu List INPUT SELECT INPUT ASP.
  • Page 21 Borders Puts borders (black bands) around the video image (top and bottom (Ver.)/left and right (Hor.) edges). When the output aspect ratio is set to 16:9 while the input aspect ratio is 4:3, a black band will appear both left and right edges.
  • Page 22 Adjustments and Settings Using Menus (continued) Audio Input Assigns the audio input terminal for the video input that is currently selected. Change the video input selection to enable assignment for other inputs. Setting Values: Off, Digital 1-4, Analog, HDMI Default Value: Digital 1 (Component 1), Digital 2 (S-Video 1), Digital 3 (S-Video 2), Digital 4 (Component 2), Analog (Video 1)
  • Page 23 HDCP Mode Sets the method for processing HDCP signals input from the HDMI terminal. HDCP signals are not output from the analog terminal. Connect the HDMI output terminal of this unit to a HDCP- compatible display device via HDMI or DVI. Setting Values: Off, On Default Value: On ●...
  • Page 24 Adjustments and Settings Using Menus (continued) Aspect Ratio Sets the output aspect ratio. 1. Display Use this to set the aspect ratio of display devices connected to this unit. Output signals change accordingly with the aspect ratio selected. This is normally set to 16:9.
  • Page 25 Display Profile This feature enables items set at the OUTPUT SETUP menu ( Analog/Digital , Format , Aspect Ratio and Colorspace ) to be stored as profiles. The items below will be stored. Setting Values: Select (Profile 1-4), User, Save (Profile 1-4), Auto (Off, On) Default Value: ●...
  • Page 26: Specifications

    Specifications o Input Terminal VIDEO 2-line, RCA S-VIDEO 2-line, mini-DIN 4 pin COMPONENT/RGB 2-line, RCA SYNC 2-line, RCA COMPONENT/RGBHV 1-line, BNC HDMI 4-line (Refer to the input terminal signal table for the video format. (A Page 11)) ANALOG AUDIO 1-line 2-channel (L/R) RCA DIGITAL AUDIO Optical Digital 2-line, S/PDIF Toslink...
  • Page 27: Memo

    Memo...
  • Page 28 © 2005 Victor Company of Japan, Limited...

This manual is also suitable for:

Ld-hd1ku

Table of Contents