Polycom VVX150 Configuration Manual page 10

Hide thumbs Also See for VVX150:

Table of Contents

Auto provisioning process will start during phone first boot or after reboot process has been

initiated by user. DHCP server will instruct the phone where from to pickup appropriate

configuration file. If everything is done as above described, you should have successfully

registered your phone to PBXware. Dial *123 to verify registration.

TFTP or HTTP

Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.

Enter username and password and press Confirm button.

details are username: admin and password: admin.

Click on System Management link in the left hand navigation menu.

Click on Auto Provisioning link in the submenu, and in the ITSP Provisioning section enter

the following in the ConfigURL field:

NOTE:

Our recommendation is to use the HTTP.

Example for Hostname using HTTP:

http://username:password@abc.bicomsystems.com/prov/$mac.xml

Example for IP Address using HTTP:

http://username:password@192.168.1.10/prov/$mac.xml

Replace username and password with Auto Provisioning username and password.

Example for Hostname using TFTP:

tftp://voip.bicomsystems.com/$mac.xml

Example for IP Address: tftp://192.168.1.10/$mac.xml

NOTE:

Factory default login

Table of Contents

Show Quick Links

Table of Contents