Table of Contents
Advertisement
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3-4
Grounding Instructions .................................................. 5
Identification .................................................................. 6
Specifications ................................................................ 6
Bending Attachment Groups ......................................7-8
Setup ........................................................................9-10
Operation ................................................................11-13
Illustrated Bending Glossary ....................................... 14
Bending Instructions ..............................................15-16
Additional Bending Instructions .............................17-19
Additional Bending Tables ......................................20-26
Handle Removal and Replacement ............................. 27
Transportation ............................................................. 27
Maintenance ................................................................ 28
Troubleshooting ......................................................29-31
Illustrations and Parts Lists ....................................32-34
Schematic Diagram ..................................................... 35
Control Assembly ........................................................ 36
Bending Shoes and Roller Supports ......................37-43
Greenlee Tools, Inc.
Description
The Greenlee 555C Electric Bender Classic is intended
to bend 1/2" to 2" conduit and pipe.
Bending shoe groups are available to accommodate the
following types:
• Electrical Metallic Tubing
• Intermediate Metallic Conduit
• Rigid Conduit
• PVC-Coated Rigid Conduit
• Schedule 40 Pipe
The shoe groups are shown in the "Bending Attachment
Groups" section of this manual.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Loctite is a registered trademark of Henkel Corp.
Mobil is a registered trademark of Mobil Oil Corporation.
KEEP THIS MANUAL
2
555C Electric Bender Classic
555C Electric Bender Classic
Serial Codes AFB and ADE
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
Advertisement
Table of Contents
