KTM 950 ADVENTURE 2003 Manual page 65

6-11
M6x85
M6x30
M6x30
1
M6x30
M6x35
M6x30
M6x30
M6x30
2
Clutch cover
– Mount the dowel pins on the engine case and put
a new clutch cover gasket in place.
NOTE: remove the locking bolt to make it easier to
mount the clutch cover.
M6x30
M6x30
– Turn the water pump shaft
the balancer shaft when the clutch cover is mounted.
– Mount the inner clutch cover together with the outer clutch cover,
inserting the bolts as illustrated. Tighten to 10 Nm.
– Screw the locking bolt back in.
1
until the recess fits over the driver
2
of