Agilent Technologies 8753ES Datasheet page 11

External source mode 1 (CW time sweep only)
Frequency range
R-channel input requirements (typical)
Power level
Spectral purity
Maximum
spurious input
Residual FM
Typical settling time
Frequency readout accuracy 0.1% (automatic)
Input frequency accuracy requirement
Manual
Accuracy
Magnitude Characteristics
Dynamic accuracy
Display resolution
Marker resolution 3
Trace noise
(+5 dBm at test-port, ratio measurement, 3 kHz BW)
300 kHz to 3 GHz
3 GHz to 6 GHz
1. See the Agilent 8753ES descriptions and options for a functional description.
Measurement accuracy is dependent on the stability of the input signal.
2. Typical performance.
3. Marker resolution for magnitude; phase and delay is dependent upon measured
value. Resolution is limited to five digits.
300 kHz to 6 GHz
0 to -25 dBm
<-30 dBc
<20 kHz
500 ms (automatic)
50 ms (manual)
2
-0.5 to 5 MHz
(see magnitude and phase
characteristics)
(10 Hz IF BW)
0.001 dB/division
0.001 dB
<0.006 dB rms
<0.010 dB rms
Reference level
Range
Resolution
Stability 2
30 kHz to 3 GHz
3 GHz to 6 GHz
Phase Characteristics
Dynamic accuracy
Range
Display resolution
Marker resolution 3
Trace noise
(+5 dBm at test-port, ratio measurement, 3 kHz BW)
300 kHz to 3 GHz
3 GHz to 6 GHz
Reference level
Range
Resolution
Stability
30 kHz to 3 GHz
3 GHz to 6 GHz
Polar characteristics
Range
Reference
±500 dB
0.001 dB
0.02 dB/° C
0.04 dB/° C
(10 Hz IF BW)
±180°
0.01°/division
0.01°
<0.038° rms
<0.070° rms
-180° to +180°
0.01°
0.05°/° C
0.20°/° C
10 x 10 –12 to 1000 units
full scale
±500 units
11