Using Surround Modes (Front Panel) - JVC RX-E100RSLB Instructions Manual

STANDBY
STANDBY/ON
D I G I T A L
S U R R O U N D
Before you start, remember...
• Make sure that you have set the speaker information correctly
(see page 15).
• You cannot adjust the center speaker output level when you have
set "CTR SP" to "NO."
• You cannot adjust the rear speaker output levels when you have set
"REAR SP" to "NO."

Using Surround Modes (Front Panel)

Surround mode cannot be used with another DSP mode. Once
Surround mode is activated, the other DSP mode in use will be
canceled.
When using the buttons on the front panel, no test tone is available.
Make adjustments while listening to the sound of the source played
back.
• You have to make this adjustment for each source.
1
Select and play software encoded with Dolby
Surround, Dolby Digital, or DTS Digital
Surround.
If "AUTO SR (Auto Surround)" is set to "ON"
Playing a digital source automatically activates an appropriate
Surround mode. (See pages 18 and 19.)
CONTROL
5/∞/3/2
Display
RX-E100R
TV DIRECT
DVD STB
ANALOG L C R PRO LOGIC
CONTROL
DSP
LPCM
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
SETTING ADJUST MEMORY
DVD DVD STB
D I G I T A L
ADJUST
HOME CINEMA CONTROL CENTER
VCR TV TAPE FM/AM
SLEEP RDS EON TA HEWS INFO TUNED ST AUTO MUTING
MH
Z
KH
Z SURROUND
INPUT
VOL
ANALOG/DIGITAL ON/OFF
INPUT ATT
VCR TV TAPE FM/AM
SURROUND
ON/OFF
When using the remote control for DSP operations,
see pages 33 to 36.
2
Press SURROUND ON/OFF to activate an
appropriate Surround mode — Pro Logic, Dolby
Digital, or DTS Digital Surround.
• Each time you press the button, Surround mode turns on and
off alternately.
SURROUND
ON/OFF
AUTO
AUTO
Note:
When playing back an analogue source, "SURROUND ON" will
not appear, and "PRO LOGIC" appears as soon as you press
SURROUND ON/OFF. (The PRO LOGIC indicator also lights up
on the display.)
3
Press ADJUST.
The CONTROL buttons now work for sound
ADJUST
adjustments.
4
Press CONTROL ∞ (or 5) repeatedly until one
of the following indications (with the current
setting) appears.
*
CONTROL
ANALOG L C R PRO LOGIC
LPCM DSP
SUBWFR LFE
DOLBY D DGTL AUTO
LS S RS
DTS INPUT ATT
TO BE CONTINUED ON THE NEXT PAGE
DSP
MODE
MASTER VOLUME
Then
Ex.: When Dolby Digital is activated
VOL
VOL
VOL
37