Ms-904Hs Electrical Interface - Symbol MiniScan MS-804FZY Integration Manual

MS-804FZY and MS-904HS Integration Guide

MS-904HS Electrical Interface

lists the pin functions of the MS-904HS interface.
Table 4-1
Pin
Pin Name
No.
1 Trigger
2 TXD
3 RXD
4 Not used
5 Ground
6 Power
7 CTS
8 RTS
9 Beeper/
Download
*I = Input O = Output
4-2
Figure 4-1. MiniScan Connector
Table 4-1. MS-904HS Electrical Interface
Type*
I Signals scanner to begin scanning session.
O Serial data transmit output. Drives the serial data receive input on
the device communicating with the scanner.
I Serial data receive input. Driven by the serial data transmit output
on the device communicating with the scanner.
Power supply ground input and signal ground reference.
I 5.0 VDC ± 10%
I Clear-to-send handshaking input line, used only in conjunction with
the RTS line. Optionally used by another device to signal the
scanner to begin transmitting data.
O Request-to-send handshaking output line, used only in conjunction
with the CTS line. Optionally used by the scanner to signal another
device that data is available to send.
I/O During normal operation this signal functions as an external beeper
drive line. This signal can sink 50 mA of current to drive an external
beeper, and is normally pulled up. This signal is also used to begin
Flash Download operation when grounded externally during power
up.
Function